MOS-94P Multiple Launch Rocket System (MLRS) Repairer M142 HIMARS Download
Page 44 of 188
Performance Steps 1. Perform a visual inspection of the turret assembly and correct any defects. Check the following items below: a. Bolts. b. Bearings and bushings. c. Components. d. Electrical cables and connectors. e. Hoses and fluid lines. 2. Rotate the turret manually until the 1.25-degree limit switch is free (M270 only). 3. Make an index mark on the turret and one on the base. 4. Remove the cable bundle from the turret. a. Disconnect W340P4 and W340P5 (M270A1) Disconnect W23P5 (M270). b. Cut cables ties securing cable. c. Remove four clamps from cable bundle and secure clamps to turret. d. Install cable ties on W305, W306, W307, W318, W81, and W340 to aid in installation. 5. Disconnect the W14P2 connector. 6. Remove the ground strap. a. Loosen bolts and nuts. b. Remove strap. 7. Remove the swivel. Disconnect hydraulic hoses and the following items. a. Elevation motor supply. b. Return. c. Transmission brake. d. Remove four bolts and washers. 3-14 1 October 2014