MOS-94P Multiple Launch Rocket System (MLRS) Repairer M142 HIMARS Download
Page 35 of 188
STP 9-94P1-SM-TG 2. Remove the defective azimuth position transducer. a. Remove the four bolts and washers securing azimuth transducer guard plate. b. Disconnect electrical cable connectors from the azimuth transducer. c. Remove the six bolts, five washers, and ground strap. d. Remove the azimuth position transducer. 3. Install azimuth position transducer. a. Install the six bolts, five washers, and ground strap. b. Install the electrical cable connectors from the transducer. 4. Adjust azimuth position transducer. Install the four bolts and washers securing azimuth transducer guard plate. 5. Verify the azimuth position transducer is operational. 6. Move the rocket launcher in azimuth. 7. Perform stow procedures. 8. Complete maintenance forms, if required. Evaluation Preparation: Ensure all items required in the condition statement (or appropriate substitutions) are on hand and all safety requirements are met. Performance Measures GO NO-GO 1. Performed a visual inspection of the azimuth position transducer _____ _____ and corrected any defects. 2. Removed the defective azimuth position transducer. _____ _____ 3. Installed the replacement azimuth position transducer. _____ _____ 4. Adjusted the azimuth position transducer. _____ _____ 5. Verified that the azimuth position transducer was operational. _____ _____ 6. Cycled the rocket launcher in azimuth. _____ _____ 7. Performed stow procedures. _____ _____ 1 October 2014 3-5