MOS-94P Multiple Launch Rocket System (MLRS) Repairer M142 HIMARS Download
Page 34 of 188
091-94P-1012 Replace the Azimuth Position Transducer DANGER Follow all Danger warning in TMs WARNING Follow all warning in TMs CAUTION Comply with all unit/shop SOPs Conditions: Perform this task in a operational environment given an armored vehicle- mounted M270A1 rocket launcher; an faulty azimuth position transducer; DA Form 2404, Equipment Inspection and Maintenance Worksheet; a shop set and tool kit; TM 9- 1055-647-13&P (M270A1); TM 9-243; and DA Pamphlet 750-8, The Army Maintenance Management System (TAMMS) Users Manual. Note: This task may be performed in a Chemical, Biological, Radiological, and Nuclear (CBRN) environment. Standards: The azimuth position transducer was replaced according to the applicable technical manuals. Perform this task without causing injury to self, other personnel, the environment or damage to equipment. CAUTION! Comply with unit/shop SOP requirements for disposal of scrap metal. Special Condition: None Special Standards: None Special Equipment: Cue: None Note: None Performance Steps 1. Perform a visual inspection of the azimuth position transducer and correct any defects. Check the following: a. Bolts, nuts, and washers. b. Bearings and bushings. c. Components. d. Electrical cables and connectors. 3-4 1 October 2014