MOS-94P Multiple Launch Rocket System (MLRS) Repairer M142 HIMARS Download
Page 150 of 188
e. hoses and fluid lines for damage. 2. Use the Interactive Electronic Technical Manual (IETM) with the Maintenance Support Device (MSD) and following the screen prompts to perform maintenance procedures. 3. Remove the defective hydraulic system component. a. Isolate the exact malfunction of the hydraulic system in accordance with TM 9- 1055-1646-13&P. b. Perform the hydraulic system failure removal procedures in TM 9-1055-1646- 13&P. 4. Install the hydraulic component. 5. Connect all electrical cables. 6. Perform hydraulic system status check. 7. Cycle the M142 HIMARS launcher in azimuth and elevation. 8. Complete maintenance forms. Evaluation Preparation: Ensure all items required in the condition statement (or appropriate substitutions) are on hand and all safety requirements are met. Performance Measures GO NO-GO 1. Performed a visual inspection of the hydraulic systems and _____ _____ corrected any defects. 2. Used the proper Interactive Electronic Technical Manual (IETM) _____ _____ using the Maintenance Support Device (MSD) and followed the screen prompts to perform maintenance procedures. 3. Removed the defective hydraulic system component(s). _____ _____ 4. Installed the replacement hydraulic component(s) without _____ _____ causing damage to the unit. 5. Connected all electrical cables. _____ _____ 6. Performed a hydraulic system status check after repairs were _____ _____ completed. 3-120 1 October 2014