MOS-94P Multiple Launch Rocket System (MLRS) Repairer M142 HIMARS Download
Page 136 of 188
091-94P-1222 Replace the Reload Manifold DANGER Follow all the Danger warning in TMs WARNING Follow all the warning in TMs CAUTION Comply with all unit/shop SOPs Conditions: Perform this task in a operational environment given an M142 HIMARS launcher; a faulty Reload Manifold; DA Form 2404, Equipment Inspection and Maintenance Worksheet; two 94P HIMARS repairers and one 13M HIMARS crew member to assist as required; a 94P tool kit; TM 9-1055-1646-13&P; TM 9-243, and DA Pamphlet 750-8, The Army Maintenance Management System (TAMMS) Users Manual. Note: This task may be performed in a Chemical, Biological, Radiological, and Nuclear (CBRN) environment. Standards: Repair the Reload Manifold is performed according to the applicable technical manuals. Perform this task without causing injury to self, other personnel, the environment, or damage to equipment. Special Condition: None Special Standards: None Special Equipment: Cue: None Note: None Performance Steps 1. Inspect the reload manifold and correct any defects in accordance with TM 9-1055- 1646-13&P. 2. Disconnect the hydraulic coupling halves. 3. Disconnect all the W510 cables from the reload manifold. 4. Remove the adapter assembly and o-ring from the boom drain port. 5. Remove the elbow assembly and coupling half from the reload manifold hoist brake port union. 3-106 1 October 2014