MOS-94P Multiple Launch Rocket System (MLRS) Repairer M142 HIMARS Download
Page 103 of 188
STP 9-94P1-SM-TG 091-94P-1160 Perform Surveillance Test of the Missile/Launch Pod Assembly DANGER Follow all Danger in TMs WARNING Following all Warning in TMs CAUTION Comply with all unit/shop SOPs Conditions: Perform this task in an operational environment given a missile test (AN/TSM-212 Missile Monitor Test Device (MMTD)); a faulty Missile/Launch Pod Assembly (MLPA); equipment; tools; 94P repairers needed to perform a surveillance test on the M/LPA; DA Form 2415, Ammunition Condition Report; DA Pamphlet 750-8, The Army Maintenance Management System (TAMMS) Users Manual; SF 368, Product Quality Deficiency Report; SF 364, Report of Discrepancy (ROD) and TM 9-4935-1644- 40&P. Note: This task may be performed in an Chemical, Biological, Nuclear and Radiological (CBNR) environment. Standards: The surveillance test on the M/LPA was performed according to the technical manuals. Ensure that this task is performed without causing injury to personnel, the environment, or damage to equipment. Special Condition: None Special Standards: None Special Equipment: Cue: None Note: None Performance Steps 1. Perform Surveillance Inspections in accordance with Classification of Defects Check List. Access the Classification of Defects Check List by TM 9-1410-ATACMS-BAT, then clicking on the following Hot Spots: Ammunition TM 9-1410-644-40&P, ARMY TACMS Table of Contents, Inspection and Test Requirements, Surveillance Inspection, General. 2. Perform MFOM Common Test Device (MCTD) setup and power up procedures. 3. Perform MCTD W3 self test and test cable (W4, W5, or W6) self test for selected M/LPA. 4. Connect the MCTD to the M/LPA and perform Electronic Surveillance Test on the M/LPA. 1 October 2014 3-73