ATP-5-0-2-1 Staff Reference Guide Volume 1 Download
Page 230 of 440
Appendix C 214 ATP 5-0.2-1 07 December 2020 FM 3-90-2 Figure C-8. Example graphic control measures for a linkup with both units moving PLANNING A LINKUP C-104. The headquarters ordering the linkup establishes— A common operational picture (COP) using available command and control systems. The command and support relationship and responsibilities of each unit before, during, and after the linkup. Fire support coordination measures. Recognition signals and communication procedures. Operations to conduct following the linkup. C-105. Both the linkup force and the stationary force should remain under the control of the directing headquarters. Operational plans must prescribe the primary and alternate day and night identification and recognition procedures, vehicle systems, and manmade materials used to identify friend from enemy. C-106. The fire support coordination line (FSCL) is adjusted as one force moves toward the other. An RFL is established between the two units, usually at the point where the two units plan to establish contact. C-107. In conducting a linkup with airborne or air assault units, priority for sustainment by air is given to units assaulting the objective area. Supplies for the linkup forces normally move by land. If the objective area is to be defended jointly by the linkup and airborne or air assault unit, supplies for the linkup force may be flown into the objective area and stockpiled.