ATP-4-90 Brigade Support Battalion Download
Page 96 of 154
Chapter 6 6-4 ATP 4-90 18 June 2020 Logistics Release Point A logistics release point is a pre-coordinated ground location where the maneuver companies and FSCs meet to initiate resupply to the companies. The FSC commander and battalion S-4 plan the location, timing, and establishment of LRPs for the maneuver battalion. Planners must consider mission variables and security considerations when determining the LRP’s location. The LRP is located to afford the best protection possible from observation and direct fire. Units use LRPs to maximize distribution efficiency and reduce the time and distance the supported unit travels to receive supplies. Resupply at an LRP is a planned, coordinated, and synchronized operation. The LRP is located between the combat trains and the maneuver battalion’s company trains. An LRP is normally established and secure for only a limited duration. The FSC pushes configured LOGPACs to the LRP to resupply maneuver companies. Alternatively, the FSC may coordinate for the BSB distribution company to throughput the supplies directly to the LRP. Company first sergeants typically arrive at LRP 30 minutes prior to the LOGPAC arrival to conduct coordination with the BN CSM and each other. They remount their vehicles five minutes before LOGPAC arrives and ideally lead their company's LOGPAC vehicles directly back to their company positions immediately upon their arrival at the LRP location. During LSCO LRP should be conducted during periods of limited visibility whenever possible. LOGPAC duration is METT-TC dependent, largely informed by distance and terrain between the LRP location and the company areas. Two hours is a good planning factor. CO 1SG lead their LOGPAC vehicles to and from their company positions, and enforce timelines for distribution to ensure that LOGPAC vehicles arrive back at LRP simultaneously with those from the other companies. Figure 6-1 depicts an example of a LRP on a battlefield. Figure 6-1. Example of a logistics release point Aerial Delivery (Fixed-Wing and Rotary Wing) Aerial delivery provides an effective means of executing unit distribution operations. In order for aerial delivery to be effective, friendly forces must control airspace throughout the AO and have neutralized enemy ground-based air defenses. Logistics units can use aerial delivery for both routine and emergency resupply