ATP-3-09-42 Fire Support for the Brigade Combat Team Download
Page 148 of 308
Chapter 5 5-32 ATP 3-09.42 1 March 2016 A separate communications network is established between the sensor and the tactical headquarters element. The commander establishing the sensor-to-shooter link can task the tactical headquarters element and the firing platform. Specific targets or target areas of interest are pre-designed to focus the sensor and orient the shooter. Fires against expected targets or target areas of interest are pre-cleared. Airspace, if necessary, is pre-cleared. The total time from sensor acquisition to effects on the target is less than the estimated target dwell time. A well-defined start time for this relationship, and a clear end-state, are established for the sensor-to-shooter link. OPTION 3 5-133. Option 3 is a non-standard support relationship given to intelligence and field artillery organizations in order to minimize the attack time against high-payoff targets with short dwell times (see figure 5-5). Figure 5-5. Option 3: sensor-to-shooter 5-134. The sensor bypasses normal reporting channels and communicates with a tactical headquarters organization or device that it would not send data to under normal circumstances. However, the information enters the fire support system at some echelon higher than in option 2. 5-135. The following considerations apply: The sensor is capable of locating and describing the target to standards that warrant immediate attack. The commander establishing the sensor-to-shooter link can task the sensor. The sensor possesses compatible communications with those of the tactical headquarters element with which it is communicating. The distance between the sensor and the tactical headquarters element allows direct or automatic relay communications. A separate communications network is established between the sensor and the tactical headquarters element. The commander establishing the sensor-to-shooter link can task the tactical headquarters element and the firing platform. Specific targets or target areas of interest are pre-designed to focus the sensor and orient the shooter. Fires against expected targets or target areas of interest are pre-cleared. Airspace, if necessary, is pre-cleared.