Sign up to sell your inventory with NSN Lookup

TM-9-2320-334-13&P LHST Operator, Field and Parts Manual M1147A1 Trailer Download

Page 817 of 1184

TM 9-2330-334-13&P SHUTTLE TWIST LOCK REPLACEMENT - CONTINUED 0101 00 0101 00-3/4 Blank Change 1 INSTALLATION NOTE LH and RH twist locks are installed the same way. LH side is shown. 1. Position block (7) and swivel arm (5) in shuttle (10). NOTE Tighten nut and then loosen one half turn to allow joint to pivot and insert cotter pin. 2. Install handle (2) bolt (9), nut (8), and new cotter pin (11) on swivel arm (5). 3. Install pivot lock (6) in swivel arm (5) and block (7). 4. Position bolt (4) through swivel arm (5) and pivot lock (6) with self-locking nuts (3). 5. Tighten self-locking nut (3) to 150-170 lb-ft (203-258 N·m). 6. Install retaining pin (1) in handle (2). END OF TASK END OF WORK PACKAGE