TM-9-2320-334-13&P LHST Operator, Field and Parts Manual M1147A1 Trailer Download
Page 805 of 1184
TM 9-2330-334-13&P SHUTTLE AND GUIDE BRACKET REPLACEMENT - Continued 0100 00 0100 00-5 REMOVAL - Continued NOTE If shuttle cannot be moved by hand, reinstall winch to front of trailer, reinstall hook and perform steps 5 through 10. 18. Align roller pin (15) with service hole (16) on rail (17). WARNING Shuttle weighs approximately 550 lbs (250 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in serious injury to personnel or damage to equipment. NOTE LH and RH front and rear roller pins are removed the same way. Front LH roller pin is shown. 19. Push roller pin (15) through roller (20) and shuttle (6). 20. Perform previous step on remaining roller pins. 21. Remove four grease fittings (21) from roller pins (15).