TM-9-2320-334-13&P LHST Operator, Field and Parts Manual M1147A1 Trailer Download
Page 804 of 1184
TM 9-2330-334-13&P SHUTTLE AND GUIDE BRACKET REPLACEMENT - Continued 0100 00 0100 00-4 REMOVAL - Continued NOTE • If shuttle cannot be moved by hand, reinstall hook from winch and perform previous two steps until alignment is achieved. • LH and RH front and rear roller pins are removed the same way. Front LH roller pin is shown. 13. Align roller pin (15) with service hole (16) on rail (17). WARNING Retaining rings are under tension and can act as projectiles when released, causing severe eye injury. Use care when removing retaining rings. Failure to comply may result in injury to personnel. 14. Remove retaining ring (18) from roller pin (15). 15. Perform previous two steps on remaining roller pins. NOTE If shuttle cannot be moved by hand, move winch to rear of trailer, reinstall hook and perform steps 5 through 10. 16. Push shuttle (6) back approximately 3 feet (91 cm) for access to four bolts (19). 17. Remove four bolts (19) from shuttle (6).