TM-9-2320-334-13&P LHST Operator, Field and Parts Manual M1147A1 Trailer Download
Page 738 of 1184
TM 9-2330-334-13&P DRAWBAR REPLACEMENT - Continued 0090 00 Change 1 0090 00-6 INSTALLATION – Continued NOTE • LH and RH drawbar hinges are installed the same way. RH drawbar hinge shown. • Line up flat spot on taper pin with flat spot on drawbar hinge bracket. 4. Position taper pin (9) on drawbar hinge bracket (12) and drawbar (3). 5. Position four washers (15), bolt (16), and nut (17) on taper pin (9). 6. Tighten nut (17) until the head of the taper pin (9) is flush with the drawbar hinge bracket (12). 7. Remove nut (17), bolt (16), and four washers (15) from taper pin (9). Discard nut, bolt, and washers.