TM-9-2320-334-13&P LHST Operator, Field and Parts Manual M1147A1 Trailer Download
Page 733 of 1184
TM 9-2330-334-13&P DRAWBAR REPLACEMENT 0090 00 0090 00-1 Change 1 THIS WORK PACKAGE COVERS: Removal, Installation, Operational Checks INITIAL SETUP: Maintenance Level Field Tools/Special Tools Gloves, Rubber (Item 6, WP 0167 00) Goggles, Industrial (Item 8, WP 0167 00) Sling, Cargo (Item 16, WP 0167 00) Tool Kit, Genl Mech (Item 24, WP 0167 00) Wrench, Impact, Pneumatic (Item 32, WP 0167 00) Socket Set, Impact (Item 18, WP 0167 00) Wrench, Torque, 0-175 lb-ft (Item 34, WP 0167 00) Materials/Parts Bolt and Self-Locking Nut (4) (Item 1, WP 0168 00) Materials/Parts (Cont) Washer, Lock (4) (Item 17, WP 0168 00) Nut (2) (Item 9, WP 0165 00) Nut, Self-Locking (2) (Item 33, WP 0168 00) Screw (2) (Item 12, WP 0165 00) Washer (8) (Item 20, WP 0165 00) Personnel Required Two Equipment Conditions Gladhand hoses removed (WP 0079 00) Bump stop and bump stop extension removed (WP 0104 00) Drawbar lift valve removed (WP 0094 00) Drawbar eye removed (WP 0092 00) GENERAL This work package contains information and instructions to replace the Load Handling System Trailer (LHST) drawbar. WARNING • Drawbar weighs approximately 215 lbs (97 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. • Wear appropriate eye protection when working under trailer due to the possibility of falling debris. Failure to comply may result in injury to personnel.