Sign up to sell your inventory with NSN Lookup

TM-9-2320-334-13&P LHST Operator, Field and Parts Manual M1147A1 Trailer Download

Page 710 of 1184

TM 9-2330-334-13&P FRAME RAIL REPLACEMENT - Continued 0087 00 0087 00-12 INSTALLATION – Continued WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. NOTE LH and RH sides of suspension is installed on axle the same way. LH side is shown. 10. Position lockwasher (14), washer (13), and nut (12) on air bladder (11). 11. Tighten nut (12) to 35 lb-ft (47 N·m). 12. Apply sealing compound to threads of 90-degree fitting (10). 13. Install 90-degree fitting (10) in air bladder (11). 14. Connect air hose (9) to 90-degree fitting (10).