TM-9-2320-334-13&P LHST Operator, Field and Parts Manual M1147A1 Trailer Download

Page 691 of 1184

TM 9-2330-334-13&P WHEEL BEARING/HUB SEAL REPLACEMENT - Continued 0085 00 0085 00-11 Change 1 INSTALLATION - Continued NOTE Ensure inner wheel bearing nut is installed on spindle with nub facing out from wheel end hub. 10. Position inner wheel bearing nut (9) on spindle (11). CAUTION Rotate wheel end hub to the left and to the right while tightening wheel bearing nut. Failure to comply may result in damage to equipment. 11. Tighten inner wheel bearing nut (9) to 100 lb-ft (136 N·m). 12. Loosen inner wheel bearing nut (9) one full turn (360 degrees). CAUTION Do not over tighten inner wheel bearing nut. Failure to comply may result in damage to equipment. 13. Hand-tighten inner wheel bearing nut (9).