TM-9-2320-334-13&P LHST Operator, Field and Parts Manual M1147A1 Trailer Download
Page 686 of 1184
TM 9-2330-334-13&P WHEEL BEARING/HUB SEAL REPLACEMENT - Continued 0085 00 Change 1 0085 00-6 CLEANING/INSPECTION WARNING • Solvent, Cleaning Compound (MIL-PRF-680) is TOXIC and flammable. Wear protective goggles and gloves; use only in well-ventilated area; avoid contact with skin, eyes, and clothes, and do not breath vapors. Keep away from heat or flame. Never smoke when using Cleaning Solvent; the flashpoint for Type I Cleaning Solvent is 100°F (38°C) and for Type II is 138°F (50°C). When not using MIL-PRF-680 solvents, ensure MIL-PRF-680 solvent container is sealed. Store, handle, and dispose of unused and spent solvents in accordance with local procedures and plans. Failure to comply may result in serious injury or death to personnel. • If personnel become dizzy while using Dry Cleaning Solvent, immediately get fresh air and medical help. If Dry Cleaning Solvent contacts skin or clothes, flush with cold water. If Dry Cleaning Solvent contacts eyes, immediately flush eyes with water and get medical attention. Failure to comply may result in serious injury or death to personnel. 1. Thoroughly clean all metal parts with Dry Cleaning Solvent and dry with wiping rag prior to inspection. 2. Inspect inner wheel bearing cone (13), outer wheel bearing cone (10), cup (15), and cup (14) for scoring, pitting, corrosion, and excessive wear. Replace both wheel bearing cones and cups if either fails visual inspection.