TM-9-2320-334-13&P LHST Operator, Field and Parts Manual M1147A1 Trailer Download
Page 669 of 1184
TM 9-2330-334-13&P HEIGHT CONTROL VALVE AND LINKAGE REPLACEMENT\ 0084 00 ADJUSTMENT 0084 00-1 Change 1 THIS WORK PACKAGE COVERS: Removal, Installation, Operational Checks INITIAL SETUP: Maintenance Level Field Tools and Special Tools Goggles, Industrial (Item 8, WP 0167 00) Tool Kit, Genl Mech (Item 24, WP 0167 00) Wrench, Torque, 0-200 lb-in. (Item 35, WP 0167 00) Tape Measure (Item 22, WP 0167 00) Straight Edge (Item 21, WP 0167 00) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 6, WP 0165 00) Materials/Parts (Cont.) Sealing Compound (Item 14, WP 0165 00) Nut, Self-Locking (2) (Item 26, WP 0168 00) Nut, Self-Locking (2) (Item 34, WP 0168 00) Wooden Block 6.12 in. (15.5 cm) high Equipment Conditions Trailer uncoupled (WP 0043 24, TM 2320-392-10-1) GENERAL This work package contains information and instructions to replace the Load Handling System Trailer (LHST) height control valve and linkage. WARNING • Wear appropriate eye protection when working under trailer due to the possibility of falling debris. Failure to comply may result in injury to personnel. • Vent air system before disconnecting air hoses. Pressurized air can blow dirt and debris with sufficient force to cause injury. Safety goggles must be worn when working with compressed air. Failure to comply may result in injury to personnel. NOTE Tag air hoses and connection points prior to disconnecting.