TM-9-2320-334-13&P LHST Operator, Field and Parts Manual M1147A1 Trailer Download
Page 600 of 1184
TM 9-2330-334-13&P ANTI-LOCK BRAKE SYSTEM (ABS) RELAY VALVE AND BRAKE PROTECTION VALVE REPLACEMENT – Continued 0075 00 Change 1 0075 00-8 INSTALLATION WARNING Adhesive, solvents and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. NOTE • Perform the following seven steps on rear brake protection valve. • Install plastic cable ties as required. 1. Apply sealing compound to threads of 90-degree fitting (23) and two adapters (27). 2. Install preformed packing (29) and air filter (28) in rear brake protection valve (26). 3. Install two adapters (27) in rear brake protection valve (26). 4. Install tee fitting (25) on adapter (27). 5. Install 90-degree fitting (24) on tee fitting (25). 6. Install rear brake protection valve (26) on air tank (13). 7. Connect two air hoses (23) to 90-degree fitting (24) and tee fitting (25).