TM-9-2320-334-13&P LHST Operator, Field and Parts Manual M1147A1 Trailer Download
Page 579 of 1184
TM 9-2330-334-13&P ANTI-LOCK BRAKE SYSTEM (ABS) POWER AND DIAGNOSTIC 0074 00 CABLE AND DIAGNOSTIC TOOL REPLACEMENT - Continued 0074 00-3 Change 1 REMOVAL - Continued NOTE • Junction box connections for main electrical harness and ABS power and diagnostic harness must be disconnected to remove ABS power and diagnostic cable from vehicle. • All main electrical harness and ABS power and diagnostic cable terminal lugs are removed the same way. Junction box terminal lug 1 shown. Refer to Table 1. Junction Box Terminal Stud and Main Wiring Harness/ABS Power and Diagnostic Cable Terminal Lug Locations for details. • Tag all terminal lugs and terminal studs prior to removal. 2. Remove nut (4), lockwasher (5), TL609 (white ABS power and diagnostic cable ground terminal) (6), and terminal lug TL261A (7), from junction box terminal stud 1 (8). Discard lockwasher. 3. Repeat the previous step on remaining main electrical harness and ABS power and diagnostic cable terminal lugs. Table 1. Junction Box Terminal Stud and Main Wiring Harness/ABS Power and Diagnostic Cable Terminal Lug Locations. Junction Box Terminal Stud Position Main Electrical Harness Terminal Lugs Stud Position 1 TL609, TL261A Stud Position 2 TL255A Stud Position 3 TL257A Stud Position 4 TL256A Stud Position 5 TL251A, Red ABS Terminal Lug, Blue ABS Terminal Lug Stud Position 6 TL253A Stud Position 7 TL252A