TM-9-2320-334-13&P LHST Operator, Field and Parts Manual M1147A1 Trailer Download
Page 54 of 1184
TM 9-2330-334-13&P EQUIPMENT DESCRIPTION AND DATA - Continued 0002 00 0002 00-6 EQUIPMENT DATA - Continued WARNING Do not exceed maximum speed and grade limitations during normal operations. Do not exceed maximum side slope or departure angles or ford water greater than maximum depth. Failure to comply may result in serious injury or death to personnel. Table 4. Trailer Performance Data provides information for the LHST. Table 4. Trailer Performance Data. Maximum Speed (primary roads, 2% grade) Maximum Speed (primary roads, 3% grade) Maximum Grade Ability Maximum Side Slope Ability Maximum Departure Angle Maximum Fording Depth (without preparation) Minimum Ground Clearance 35 mph (72 km/h) 25 mph (64 km/h). 30% 30% 30 degrees 30 in.(76 cm) 22 in. (56 cm) Table 5. System Data provides detailed information for the major components of the LHST. Table 5. System Data. VOLTAGE REGULATOR Make .................................................................................................................. Dantronics, Inc. Model ..............................................................................................................................DT324B Type ............................................................................... Solid State, 12/24 VDC negative ground AXLES Make ............................................................................................................................... Dexter Type ........................................................................................................................ Non-driving SUSPENSION SYSTEM Make ............................................................................................................................... Dexter Type ............................................................................................................................. Air Bags OVERLOAD GAUGE Make ............................................................................................... Haldex Brake Products, Corp. Type .................................................................................................... Silicone filled, sealed face Pressure Range ................................................................................................. 100 psi (689.5 kPa) Max Pressure of Load Carried ...............................................................................52 psi (358.5 kPa)