TM-9-2320-334-13&P LHST Operator, Field and Parts Manual M1147A1 Trailer Download
Page 534 of 1184
TM 9-2330-334-13&P BRAKES REPLACEMENT/ADJUSTMENT - Continued 0069 00 0069 00-8 INSPECTION - Continued NOTE Over time, a ridge will form on the outer edge of the brake shoes. This is normal and does not affect brake shoe serviceability. 4. Inspect brake shoes for OUT-OF-SERVICE and IN-SERVICE criteria as shown in Table 1, Brake Shoe Service Criteria. Table 1. Brake Shoe Service Criteria. OUT-OF-SERVICE IN-SERVICE Cracks or voids that exceed 1/16 in. (0.16 cm) in width. Cracks that exceed 1-1/2 in. (3.75 cm) in length. Vertical or horizontal cracks in lining edge not exceeding 1/16 in. (0.16 cm) in width or not exceeding 1-1/2 in. (3.75 cm) in length. Portion of lining missing that exposes a fastening device, or worn to the point that a fastening device is exposed. Corner segment missing with no fastening device (rivet or bolt) exposed. Cracks across the lining face that extend through the lining edges. Surface cracks in lining face that can extend from hole to hole. Pitting and material erosion on the lining face.