TM-9-2320-334-13&P LHST Operator, Field and Parts Manual M1147A1 Trailer Download
Page 498 of 1184
TM 9-2330-334-13&P MAIN ELECTRICAL HARNESS REPLACEMENT - Continued 0066 00 Change 1 0066 00-6 INSTALLATION NOTE • All main electrical harness clamps are installed the same way. One shown. • Install plastic cable ties as required. • Install convoluted tubing as required. 1. Position main electrical harness (8) on trailer. 2. Position main electrical harness (8) in clamp (11). NOTE Do not tighten clamps until harness is connected to junction box and there’s enough slack to connect harness to converter box. 3. Position clamp (11) on rail assembly (12) with self-locking nut (9) and bolt (10). 4. Perform the previous two steps on remaining clamps.