TM-9-2320-334-13&P LHST Operator, Field and Parts Manual M1147A1 Trailer Download
Page 448 of 1184
TM 9-2330-334-13&P JUNCTION BOX REPLACEMENT - Continued 0059 00 Change 1 0059 00-6 INSTALLATION - Continued NOTE All junction box terminal lugs are installed the same way. Terminal lug 1 is shown. Refer to Table 2. Junction Box Terminal Stud and Wiring Harness Terminal Lug Locations for details. 4. Install ABS ground terminal lug (10) and terminal lugs TL282 (9), TL275 (8), TL264 (7), and TL261A (6) on junction box terminal stud 1 (11) with lockwasher (5) and nut (4). 5. Perform the previous step on remaining junction box terminal studs. Table 2. Junction Box Terminal Stud and Wiring Harness Terminal Lug Locations. Junction Box Terminal Stud Position Electrical Harness Terminal Lugs Stud Position 1 TL261A, TL264, TL275, TL282, ABS Ground Terminal Lug Stud Position 2 TL255A, TL267, TL273, TL281 Stud Position 3 TL257A, TL265, TL271 Stud Position 4 TL256A, TL266, TL272 Stud Position 5 TL251A, ABS Constant Power, ABS Stop Light Power Stud Position 6 TL253A, TL274 Stud Position 7 TL252A, TL268