TM-9-2320-334-13&P LHST Operator, Field and Parts Manual M1147A1 Trailer Download
Page 445 of 1184
TM 9-2330-334-13&P JUNCTION BOX REPLACEMENT - Continued 0059 00 0059 00-3 Change 1 REMOVAL – Continued NOTE • All junction box terminal lugs are removed the same way. Terminal lug 1 is shown. Refer to Table 1. Junction Box Terminal Stud and Wiring Harness Terminal Lug Locations for details. • Tag terminal lugs and terminal studs prior to removal. 2. Remove nut (4), lockwasher (5), and terminal lugs TL261A (6), TL264 (7), TL275 (8), TL282 (9), and ABS ground terminal lug (10) from junction box terminal stud 1 (11). Discard lockwashers. 3. Perform the previous step on remaining junction box terminal studs. Table 1. Junction Box Terminal Stud and Wiring Harness Terminal Lug Locations. Junction Box Terminal Stud Position Electrical Harness Terminal Lugs Stud Position 1 TL261A, TL264, TL275, TL282, ABS Ground Terminal Lug Stud Position 2 TL255A, TL267, TL273, TL281 Stud Position 3 TL257A, TL265, TL271 Stud Position 4 TL256A, TL266, TL272 Stud Position 5 TL251A, ABS Constant Power, ABS Stop Light Power Stud Position 6 TL253A, TL274 Stud Position 7 TL252A, TL268