TM-9-2320-334-13&P LHST Operator, Field and Parts Manual M1147A1 Trailer Download
Page 315 of 1184
TM 9-2330-334-13&P PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INCLUDING LUBRICATION INSTRUCTIONS - Continued 0052 00 0052 00-7 Change 1 LUBRICATION SERVICE INTERVALS - NORMAL CONDITIONS - Continued Table 3. Cleaning Agents. Specification Type P/N WD-40 Corrosion Preventive Compound Table 4. Cleaning Agent/Temperature. EXPECTED TEMPERATURES* DESCRIPTION CAPACITY Above +15°F (Above -9°C) +15°F to -15°F (-9°C to -26°C) -15°F to -50°F (-26°C to -46°C) All metal parts as required. A/R Corrosion Preventive Compound *For arctic operation refer to FM 9-207, Operation and Maintenance of Ordnance Materiel in Cold Weather (0 degrees to minus 65°F). LUBRICATION SERVICE INTERVALS - UNUSUAL CONDITIONS The trailer will require extra service and care when you operate under unusual conditions. High or low temperatures, long periods of hard use, or continued use in sand, water, mud, or snow will break down the lubricant requiring you to add or change lubricant more often. CLEANING AND LUBRICATION WARNING • Solvent, Cleaning Compound (MIL-PRF-680) is TOXIC and flammable. Wear protective goggles and gloves; use only in well-ventilated area; avoid contact with skin, eyes, and clothes, and do not breath vapors. Keep away from heat or flame. Never smoke when using Cleaning Solvent; the flashpoint for Type I Cleaning Solvent is 100°F (38°C) and for Type II is 138°F (50°C). When not using MIL-PRF-680 solvents, ensure MIL-PRF-680 solvent container is sealed. Store, handle, and dispose of unused and spent solvents in accordance with local procedures and plans. Failure to comply may result in serious injury or death to personnel. • If personnel become dizzy while using Dry Cleaning Solvent, immediately get fresh air and medical help. If Dry Cleaning Solvent contacts skin or clothes, flush with cold water. If Dry Cleaning Solvent contacts eyes, immediately flush eyes with water and get medical attention. Failure to comply may result in serious injury or death to personnel. Dirt, grease, oil, and debris only get in the way and may cover up a serious problem. Use Dry Cleaning Solvent on metal surfaces where directed.