TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 87 of 796
TM 9-2320-366-34-4 (62) Connect connector J52 (31) to connector P52R (32). NOTE Left and right rear fenders are installed the same way. Right side shown. (63) Position bracket (48) on support bracket (49) with two screws (47), washers (46), and self-locking nuts (45). (64) Tighten two self-locking nuts (45) to 18-22 lb-ft (24-30 N·m). (65) Position two resilient mounts (43) on rear fender (40) with two screws (44), washers (42), and self-locking nuts (41). (66) Position washer (39) and hook (38) on rear fender (40) with resilient mount (37), washer (36), and self-locking nut (35). (67) Tighten two self-locking nuts (41) and self-locking nut (35) to 18-22 lb-ft (24-30 N·m). (68) Perform steps (63) through (67) on left side rear fender. b. Follow-On Maintenance. Lower dump bed (TM 9-2320-366-10-1). End of Task. Change 1 18-33