TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 86 of 796
TM 9-2320-366-34-4 18-3. M1090/M1094 PINTLE HOOK EXTENSION KIT INITIAL INSTALLATION (CONT) NOTE Use bolts P/N 12414307-141 and self-locking nuts P/N 12414308-025 on step (54). (54) Position two bolts (79) and self-locking nuts (80) in rear lower crossmember support (62). (55) Tighten two self-locking nuts (64 and 80) to 196-240 lb-ft (265-325 N·m). (56) Tighten six self-locking nuts (73) to 76-94 lb-ft (103-125 N·m). (57) Tighten four bolts (68) and two bolts (70) to 236-288 lb-ft (319-389 N·m). (58) Tighten two self-locking nuts (15) on L-brackets (12). NOTE Left and right clamps are installed the same way. Right side shown. (59) Install clamp (11) on L-bracket (12) with screw (10) and self-locking nut (9). (60) Perform step (59) on left side clamp. NOTE Install plastic cable ties as required. (61) Connect connector J53 (33) to connector P53 (34). 18-32 Change 1