TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 85 of 796
TM 9-2320-366-34-4 WARNING Pintle hook extension weighs approximately 90 lbs (41 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE • Step (51) requires the aid of two assistants. • Use bolts P/N 12414307-142 and self-locking nuts P/N 12414308-025 on step (51). (51) Position pintle hook extension (58) on rear crossmember (5) with four bolts (77) and self-locking nuts (78). NOTE • Use bolts P/N 12414307-143 and self-locking nuts P/N 12414308-025 on step (52). • Steps (52) through (57) require the aid of an assistant. (52) Position two bolts (59) and self-locking nuts (60) in pintle hook extension (58). (53) Tighten four self-locking nuts (78) and two self-locking nuts (60) to 196-240 lb-ft (265-325 N·m). Change 1 18-31