TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 81 of 796
TM 9-2320-366-34-4 NOTE Use bolts P/N 12414307-140 and self-locking nuts P/N 12414308-025 on step (32). (32) Position rear lower crossmember support (62) on rear crossmember (5) with two bolts (63) and self-locking nuts (64). NOTE • Position two spacers on frame rails with beveled edges facing down. • Use bolts P/N 12414307-148 and P/N 12414307-149 and self-locking nuts P/N 12414308-025 on steps (33 and 34). • Left and right side of rear main crossmember support is installed the same way. Right side shown. • Route connectors and terminal lugs under rear main crossmember. (33) Position two spacers (65) and rear main crossmember support (66) on LH and RH frame rails (67 and 55) with four bolts (68) and self-locking nuts (69). (34) Position two bolts (70) and self-locking nuts (71) on rear main crossmember support (66). NOTE Use bolts P/N 12414307-079 and self-locking nuts P/N 12414308-021 on step (35). (35) Position six bolts (72) and self-locking nuts (73) on rear lower crossmember support (62). Change 1 18-27