Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download

Page 80 of 796

TM 9-2320-366-34-4 18-3. M1090/M1094 PINTLE HOOK EXTENSION KIT INITIAL INSTALLATION (CONT) (26) Remove two collars (56) and bolts (57) from rear crossmember (5). Discard collars and bolts. NOTE Use bolts P/N 12414307-143 and self-locking nuts P/N 12414308-025 on step (27). (27) Install pintle hook extension (58) on rear crossmember (5) with two bolts (59) and self-locking nuts (60). (28) Match mark four top holes (61) on rear crossmember (5). (29) Remove two self-locking nuts (60), bolts (59) and pintle hook extension (58) from rear crossmember (5). (30) Drill four 0.375 in. (9.5 mm) pilot holes in rear crossmember (5) at matchmarks. (31) Drill four 0.75 in. (19 mm) holes in rear crossmember (5). 18-26 Change 1