TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 79 of 796
TM 9-2320-366-34-4 NOTE Left and right rear fenders are removed the same way. Right side shown. (19) Removed self-locking nut (35), washer (36), resilient mount (37), hook (38), and washer (39) from rear fender (40). (20) Remove two self-locking nuts (41), washers (42), resilient mounts (43), and screws (44) from rear fender (40). (21) Remove two self-locking nuts (45), washers (46) screws (47) and bracket (48) from support bracket (49). (22) Perform steps (19) through (21) on left side rear fender. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. NOTE Left and right collars and bolts are removed the same way. Right side shown. (23) Remove collar (50) and bolt (51) from extraction tube (52). Discard collar and bolt. (24) Remove two collars (53) and bolts (54) from RH frame rail (55). Discard collars and bolts. (25) Perform steps (23) and (24) on left side collars and bolts. Change 1 18-25