TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 72 of 796
TM 9-2320-366-34-4 18-2. M1083 PINTLE HOOK EXTENSION KIT INITIAL INSTALLATION (CONT) (89) Extend rear axle shock absorber (23) length to align with hole in rear axle shock absorber front bracket (24). NOTE Perform steps (90) and (91) on vehicle serial numbers 1399 through 2987. (90) Position rear axle shock absorber (23) in rear axle shock absorber front bracket (24) with three washers (22), bolt (21), and self-locking nut (20). (91) Tighten self-locking nut (20) to 196-240 lb-ft (265-325 N·m). NOTE Perform steps (92) and (93) on vehicle serial numbers 0001 through 1398, and 2988 and higher serial numbers. (92) Position rear axle shock absorber (23) in rear axle shock absorber front bracket (24) with washer (22), bolt (21), and self-locking nut (20). (93) Tighten self-locking nut (20) to 196-240 lb-ft (265-325 N·m). (94) Position valve control panel (9) on brackets (10 and 11) with six washers (8), screws (7), washers (6), and self- locking nuts (5). (95) Tighten six screws (7) to 16-21 lb-ft (24-28 N·m). 18-18 Change 1