TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 71 of 796
TM 9-2320-366-34-4 NOTE Perform steps (82) and (83) on vehicle serial numbers 0001 through 1398, and 2988 and higher serial numbers. (82) Position rear axle shock absorber (38) in rear axle shock absorber front bracket (39) with washer (37), bolt (36), and self-locking nut (35). (83) Tighten self-locking nut (35) to 196-240 lb-ft (265-325 N·m). NOTE • Perform step (84) through (93) on right side of vehicle. • Use bolt P/N 12414307-138 on step (84). (84) Position bolt (109) and self-locking nut (110) in RH frame rail (30). (85) Tighten self-locking nut (110) to 196-240 lb-ft (265-325 N·m). NOTE Use bolt P/N 12414307-141 on step (86). (86) Position rear axle shock absorber front bracket (24) and bracket (10) on RH frame rail (30) with bolt (111) and self-locking nut (112). (87) Position bolt (113), two washers (29) and self-locking nut (114) on rear axle shock absorber front bracket (24). (88) Tighten self-locking nuts (112 and 114) to 196-240 lb-ft (265-325 N·m). Change 1 18-17