TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 70 of 796
TM 9-2320-366-34-4 18-2. M1083 PINTLE HOOK EXTENSION KIT INITIAL INSTALLATION (CONT) NOTE • Perform steps (76) through (81) on LH side of vehicle. • Use bolts P/N 12414307-141 on steps (76) and (77). (76) Position rear axle shock absorber front bracket (39) and bracket (11) on LH frame rail (45) with bolt (105) and self-locking nut (106). (77) Position bolt (107), two washers (44) and self-locking nut (108) on rear axle shock absorber front bracket (39). (78) Tighten self-locking nuts (106 and 108) to 196-240 lb-ft (265-325 N·m). (79) Extend rear axle shock absorber (38) length to align with hole in rear axle shock absorber front bracket (39). NOTE Perform steps (80) and (81) on vehicle serial numbers 1399 through 2987. (80) Position rear axle shock absorber (38) in rear axle shock absorber front bracket (39) with three washers (37), bolt (36), and self-locking nut (35). (81) Tighten self-locking nut (35) to 196-240 lb-ft (265-325 N·m). 18-16 Change 1