TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 633 of 796
TM 9-2320-366-34-4 D-58. M1089 30K WINCH PNEUMATIC TEST ADAPTER Assembly the M1089 30K winch pneumatic test adapter to the following steps. Refer to the following parts list and Figure D-67. M1089 30K Winch Pneumatic Test Adapter for details. Part Number Material Description National Stock Number Qty. NB-4-035 Tubing, Nonmetallic 4720-01-071-4042 14 in. (355.6 mm) MIL-T-27730 Tape, antiseizing 8030-00-889-3534 1 roll 207P-4 Coupling, Pipe 4730-00-881-1161 1 4-6 100102 BA Adapter, Straight, Pipe to Tube 4730-01-096-9398 1 4-4 100101 BA Nipple, Tube 4730-01-091-4012 1 Figure D-67. M1089 30K Winch Pneumatic Test Adapter a. All dimensions are in inches (millimeter). b. Cut piece of nonmetallic tubing (1) to 14.0 in. (355.6 mm). c. Remove two nuts (2), ferrules (3), and sleeves (4) from tube nipple (5). d. Install nut (2), ferrule (3), and sleeve (4) on nonmetallic tubing (1). e. Install nonmetallic tubing (1) on tube nipple (5). f. Remove nut (6), ferrule (7), and sleeve (8) from straight adapter (9). g. Install nut (6), ferrule (7), and sleeve (8) on nonmetallic tubing (1). h. Install nonmetallic tubing (1) on straight adapter (9). i. Apply on wrap of antiseizing tape to threads of straight adapter (9). j. Install pipe coupling (10) on straight adapter (9). k. Retain nut (2), ferrule (3), and sleeve (4) for future use. Change 1 D-85