TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 63 of 796
TM 9-2320-366-34-4 NOTE Use bolts P/N 12414307-143 on step (36). (36) Install pintle hook extension (80) on rear crossmember (16) with two bolts (81) and self-locking nuts (82). (37) Match mark four top holes (83) on rear crossmember (16). (38) Remove two self-locking nuts (82), bolts (81) and pintle hook extension (80) from rear crossmember (16). (39) Drill four 0.375 in. (9.5 mm) pilot holes in rear crossmember (16) at matchmarks. (40) Drill four 0.75 in. (19 mm) holes in rear crossmember (16). NOTE Use bolts P/N 12414307-140 on step (41). (41) Position rear lower crossmember support (84) on rear crossmember (16) with two bolts (85) and self-locking nuts (86). Change 1 18-9