TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 60 of 796
TM 9-2320-366-34-4 18-2. M1083 PINTLE HOOK EXTENSION KIT INITIAL INSTALLATION (CONT) (18) Remove collar (40) and bolt (41) from rear axle shock absorber front bracket (39). Discard collar and bolt. (19) Remove collar (42), bolt (43), bracket (11), two washers (44) and rear axle shock absorber front bracket (39) from LH frame rail (45). Discard collar and bolt. (20) Remove collar (46) and bolt (47) from LH frame rail (45). Discard collar and bolt. (21) Remove two collars (48) and bolts (49) from LH frame rail (45). Discard collars and bolts. NOTE Left and right sides of rear stabilizer bar are disconnected the same way. Right side shown. (22) Remove self-locking nut (50), bolt (51), and bracket assembly (52) from frame bracket (53). Discard self- locking nut. (23) Perform step (22) on left side of vehicle. (24) Lower rear stabilizer bar (54). (25) Remove two collars (55) and bolts (56) from rear crossmember (16). Discard collars and bolts. 18-6 Change 1