TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 579 of 796
TM 9-2320-366-34-4 D-13. MACHINE GUN RING WOODEN SUPPORT FABRICATION Cut from bulk wood stock according to the following information. a. Fabricate from MIL-STD 736 Group IV untreated bulk wood stock. b. Cut three (3) lengths of 2 X 4 inch stock 8 inches (20.3 cm) long. d. Sand and remove sharp edges. D-14. MAIN VALVE BODY SPRING COMPRESSION TOOL Make the main valve body spring compression tool from steel pipe according to the following instructions. Refer to the parts list and figure for details. Material Description Size Qty Pipe, Steel, 1/2 inch ID 1/2 in. (1.27 cm) ID X 1.50 in. (3.8 cm) 1 Figure D-25. Main Valve Body Spring Compression Tool a. All dimensions are in inches (millimeters). b. De-burr and remove sharp edges inside and outside compression tool surface. c. Tolerance: 1 place + /- .06 2 place + /- .03 3 place + /- .005 angles + /- 2 unless otherwise specified. h. Surface texture: 125 unless otherwise specified. D-31 D-31