TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 57 of 796
TM 9-2320-366-34-4 (3) Remove six self-locking nuts (5), washers (6), screws (7), washers (8), and valve control panel (9) from brackets (10 and 11). (4) Remove cotter pin (12) from nut (13). Discard cotter pin. (5) Remove nut (13) and washer (14) from pintle hook (15). WARNING Pintle hook weighs approximately 65 lbs (30 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. (6) Remove pintle hook (15) from rear crossmember (16). (7) Remove four self-locking nuts (17), screws (18), and support (19) from rear crossmember (16). Discard self- locking nuts. Change 1 18-3