TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 562 of 796
TM 9-2320-366-34-4 D-4. CAB MAINTENANCE STAND (CONT) Figure D-8. Cab Maintenance Stand Brace to Base Assembly l. At left side of base (1) LH, place middle Brace B on the base as shown in Figure D-8. Cab Maintenance Stand Brace to Base Assembly. m. Using angle bracket (9) on base as a template, mark holes on Brace B and match drill 0.38 in. (0.96 cm) hole through Brace B brace (4) as shown in Figure D-8. Cab Maintenance Stand Brace to Base Assembly. n. Secure Brace B to base spreader (3) using 2 bolts (11), flat washers (13), lockwashers (14), and hex nuts (15). o. Repeat steps m-n for front Brace B. D-14 D-14