TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 524 of 796
TM 9-2320-366-34-4 27-2. M1090/M1094 DUMP BODY LIFT CYLINDER REPAIR (CONT) WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (9) Apply adhesive-sealant to threads of nut (17). (10) Position nut (17) on cylinder rod (13). (11) Tighten nut (17) to 1563-1719 lb-ft (2119-2331 N·m). (12) Install preformed packing (18) on bypass housing (19). (13) Install pin (20), ball (21), pin (22), and bypass housing (19) in bypass valve (23). (14) Install preformed packing (24) on bypass valve (23). (15) Install bypass valve (23) on piston (11). 27-8