TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 515 of 796
TM 9-2320-366-34-4 NOTE Replace any part that fails visual inspection. If cylinder barrel fails inspection, replace outrigger extension cylinder assembly. (2) Inspect inner walls of cylinder barrel (1) for pitting, corrosion, or evidence of binding. (3) Inspect two rods (2) for pitting, corrosion, or evidence of binding around piston. (4) Inspect two rings (3) for pitting or corrosion. (5) Inspect two cylinder heads (4) for pitting or corrosion. c. Assembly. NOTE Apply lubricating oil to all parts during assembly. Both rods are assembled the same way. One is shown. (1) Install buffer seal (1), two wear rings (2), preformed packing (3), back-up ring (4), and rod seal (5) in cylinder head (6). 26-81