TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 51 of 796
TM TM 9-2320-366-34-4 9-2320-366-34-4 LIST OF TABLES (CONT) Number Title Page 23-1 Pinion Bearing Preload Chart .................................................... 23-12 23-2 Pinion Cone Variation Chart ..................................................... 23-15 24-1 Pinion Cone Variation Chart ..................................................... 24-11 24-2 Pinion Bearing Preload Chart .................................................... 24-34 24-3 Pinion Cone Variation Chart ..................................................... 24-37 D-1 Pneumatic Tube Lengths ........................................................ D-64 D-2 Non-Metallic Electrical Cable Conduit Lengths ......................................... D-68 D-3 M1089 30K Air Hose Lengths and Fittings ........................................... D-83 E-1 Dry Torque Limits for SAE and ANSI Screws and Free Spinning Nuts ........................ E-2 E-2 Dry Torque Limits for SAE and ANSI Prevailing Torque Nuts ............................... E-4 E-3 Dry Torque Limits for Metric Screws and Free Spinning Nuts ............................... E-5 E-4 Dry Torque Limits for Metric Prevailing Torque Nuts ..................................... E-6 E-5 Wet Torque Limits for SAE and ANSI Screws and Free Spinning Nuts ........................ E-7 HOW TO USE THIS MANUAL OVERVIEW This Technical Manual (TM) is provided to help you maintain the MTV at the Direct Support (DS) and General Support (GS) Maintenance levels. This volume, Volume 4, contains information which will assist you in the performance of DS and GS Maintenance on the MTV. Volume 4 contains the following major sections in order of appearance: • WARNING SUMMARY. Provides a summary of the most important warnings that apply throughout the manual. Read all WARNINGS and CAUTIONS before performing any maintenance procedure. • TABLE OF CONTENTS. Lists the chapters, sections, appendixes, and indexes with page numbers in order of appearance. • MAINTENANCE PROCEDURES. DS and GS Maintenance procedures to assist you in supporting the MTV. Chapters 18 and 19 are Direct Support Maintenance procedures. General Support Maintenance procedures are contained in chapters 20 through 27. Become familiar with the entire maintenance procedure before beginning any maintenance task. DIRECT SUPPORT MAINTENANCE • CHAPTER 18, SPECIAL PURPOSE KIT MAINTENANCE • CHAPTER 19, ARMAMENT/SIGHTING AND FIRE CONTROL MATERIEL MAINTENANCE GENERAL SUPPORT MAINTENANCE • CHAPTER 20, ENGINE MAINTENANCE • CHAPTER 21, TRANSMISSION MAINTENANCE • CHAPTER 22, POWER TRANSFER AND FINAL DRIVE ASSEMBLY MAINTENANCE • CHAPTER 23, FRONT AXLE MAINTENANCE Change 1 v