TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 507 of 796
TM 9-2320-366-34-4 26-12. JACK CYLINDER REPAIR This task covers: a. Disassembly b. Cleaning/Inspection c. Assembly INITIAL SETUP Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Goggles, Industrial (Item 28, Appendix B) Gloves, Rubber (Item 26, Appendix B) Pan, Drain (Item 43, Appendix B) Sling, Cargo (Item 56, Appendix B) Materials/Parts Kit, Repair (M1089) (Item 104, Appendix F) Kit, Repair (M1084/M1086) (Item 95, Appendix F) Kit Repair (2) (Item 101, Appendix F) Rag, Wiping (Item 60, Appendix C) Lubricating Oil, Engine (Item 46, Appendix C) Solvent, Dry Cleaning (Item 83, Appendix C) WARNING WARNING Jack cylinder weighs approximately 110 lbs (50 kgs). Attach a suitable lifting device prior to repair. Failure to comply may result in injury to personnel or damage to equipment. NOTE M1084/M1086/M1089 jack cylinders are repaired the same way. M1089 jack cylinder shown. a. Disassembly. (1) Place drain pan under cylinder barrel (1). (2) Remove two plugs (2) from rod (3). (3) Remove setscrew (4) from cylinder barrel (1). (4) Remove cylinder head (5) from cylinder barrel (1). Change 1 26-73