TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 487 of 796
TM 9-2320-366-34-4 26-9. M1089 ERECTION CYLINDER REPAIR This task covers: a. Disassembly b. Cleaning/Inspection c. Assembly INITIAL SETUP Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Wrench, Pipe (Item 89, Appendix B) Pan, Drain (Item 43, Appendix B) Goggles, Industrial (Item 28, Appendix B) Hammer, Non-sparking (Item 32, Appendix B) Vise, Machinists (Item 82, Appendix B) Gloves, Rubber (Item 26, Appendix B) Caps, Vise Jaw (Item 12, Appendix B) Materials/Parts Kit, Repair (Item 100, Appendix F) Rag, Wiping (Item 60, Appendix C) Lubricating Oil, Engine (Item 46, Appendix C) Solvent, Dry Cleaning (Item 83, Appendix C) Kit, Repair (Item 105, Appendix F) Personnel Required (2) a. Disassembly. WARNING Erection cylinder weighs approximately 70 lbs (32 kgs). The aid of an assistant is required to safely move it. Failure to comply may result in injury to personnel or damage to equipment. NOTE Step (1) requires the aid of an assistant. (1) Position cylinder barrel (1) in vise. (2) Place drain pan under cylinder barrel (1). (3) Remove set screw (2) and retaining ring (3) from cylinder barrel (1). 26-53