TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 474 of 796
TM 9-2320-366-34-4 26-7. M1084/M1086 LIFT CYLINDER REPAIR This task covers: a. Disassembly b. Cleaning/Inspection c. Assembly INITIAL SETUP Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Hammer, Non-Sparking (Item 33, Appendix B) Goggles, Industrial (Item 28, Appendix B) Vise, Machinists (Item 82, Appendix B) Pan, Drain (Item 43, Appendix B) Gloves, Rubber (Item 26, Appendix B) Caps, Vise Jaw (Item 12, Appendix B) Materials/Parts Kit, Repair (Item 94, Appendix F) Kit, Repair (Item 102, Appendix F) Rag, Wiping (Item 60, Appendix C) Lubricating Oil, Engine (Item 46, Appendix C) Solvent, Dry Cleaning (Item 83, Appendix C) Personnel Required (2) a. Disassembly. WARNING Lift cylinder weighs approximately 100 lbs (45 kgs). The aid of an assistant is required to safely move it. Failure to comply may result in injury to personnel or damage to equipment. NOTE Step (1) requires the aid of an assistant. (1) Position cylinder barrel (1) in vise. (2) Place drain pan under cylinder barrel (1). (3) Remove set screw (2) and cylinder head (3) from cylinder barrel (1). 26-40