TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 471 of 796
TM 9-2320-366-34-4 (6) Install ring (8) on shaft (9). (7) Install key (10) on shaft (9). CAUTION Install gear with holes in direction noted during disassembly. Failure to comply may result in damage to equipment. (8) Install gear (11) on shaft (9). (9) Install retaining ring (12) on shaft (9). (10) Install preformed packing (13) on ring gear (14). (11) Install ring gear (14) on cover (2) with match marks aligned. WARNING Adhesive-Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel (12) Apply sealing compound to threads of six bolts (15). (13) Position six bolts (15) and washers (16) on cover (2). (14) Tighten bolts (15) to 30-38 ft-lb (41-52 N m). 26-37