TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 465 of 796
TM 9-2320-366-34-4 (9) Reposition motor housing (2) in vise with output shaft (1) down. CAUTION Mark bolt hole on motor housing that aligns with timing mark on output shaft. Failure to comply may result in damage to equipment. (10) Align timing mark on output shaft (1) with any bolt hole in motor housing (2). (11) Install preformed packing (11) on motor housing (2). (12) Install spur gear shaft (12) in output shaft (1). (13) Fill motor housing (2) with lubricating oil. (14) Install spacer plate (13) on motor housing (2). (15) Install preformed packing (14) on geroler (15). CAUTION Position geroler with largest star point aligned with marked bolt hole on motor housing. Failure to comply may result in damage to equipment. (16) Install geroler (15) on spur gear shaft (12). (17) Install preformed packing (16) on geroler (15). 26-31