TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 464 of 796
TM 9-2320-366-34-4 26-5. M1084/M1086/M1089 HOIST HYDRAULIC MOTOR REPAIR (CONT) (3) Install retainer (5), seal (6), and preformed packing (7) in motor housing flange (8). (4) Install gasket (9) in motor housing flange (8). (5) Position motor housing (2) in vise with output shaft (1) up. WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (6) Apply sealing compound to four screws (10). (7) Position motor housing flange (8) on output shaft (1) with four screws (10). CAUTION Tighten screws evenly to properly seat mounting flange. Failure to comply may result in damage to equipment. (8) Tighten screws (10) to 21 lb-ft (28 N·m). 26-30